Flame detector specification. MDL units depend on the detector type.

 

Flame detector specification. E. The detection zone is a 90° cone and the detection range is up to and including 25 m. 6901 West 110th Street | Minneapolis, MN 55438 USA Phone: +1 952. To mitigate the potential risk for false alarms, the T-Low sensitivity Intelligent Fire Alarm Detection System [REV A 11/11/2022] 1 NOTIFIER® 12 Clintonville Road Northford, Connecticut 06472 Phone (800) 627-3473 The pressure-proof, fully enclosed multispectrum infrared (MIR) flame detector particularly distinguishes itself through reliable operation in difficult conditions. In the Rosemount 975MR multi-spectrum infrared flame detector, three separate infrared sensors analyze multi-spectral signals. May 20, 2019 · the detector and detection area. 2 [0. The unit shall be designed SPECIFICATION DATA Multispectrum IR Flame Detector with Pulse Output X3301 Shown with Q9033A Aluminum Mounting Arm The X3301 with pulse/relay output is a multispectrum infrared (MIR) flame detector that is designed for use in controller based systems. Flame detector IFW 15; Flame detector for continuous operation IFW 50; Flame detectors PFF; R4343 Flame Switch; Ultraviolet Flame Detector C7927; Impulse system MPT 700; Automatic burner control units IFS 110IM, 111IM; Automatic burner control units for continuous operation PFD 778; IFD 450, 454; Ultraviolet Flame Detector C7961E,F The TL105 is a battery-operated, explosion-proof test lamp designed specifically to test all General Monitors Flame Detectors including (but not limited to) the FL5000, FL500, FL4000H, and any of the FL3100 Series detectors. S. C7061 A security sensors pdf manual download. As an ideal solution to the growing demand for flame detectors in industrial applications, they are also increasingly used alongside gas detection equipment as part of a safe solution. Model FS24X™ FS24X QuadBand Triple IR™ 1. The Rosemount 975MR detects fuel and gas y fires at long distance. Fire Sentry SS4-AUV The Fire Sentry SS4-AUV represents the leading edge technology UV optical flame detectors. The DRD-E is a flame detector designed for internal use to detect large flames. La Palma Ave. The UV/IR Flame Detector can therefore be applied in areas where single UV or IR flame detectors could potentially cause false and/or unwanted alarms. The detector operates in all weather and light conditions. The best test of any optical flame detection system is a real onsite fire test using the fuel type and fire size called out within the project’s optical flame detection performance specification. SIL 2 Capable - X3301, X3302 MS IR Flame Detectors; Instruction Manuals. The two types are mass flow detectors of which the flame detector is an exam-ple, and concentration detectors such as the TCD. The detector has Division and Zone explosion-proof ratings and is suitable for use in indoor and outdoor applications. The TL105 operates up to 35 feet from the flame detector. com Model: FLS-UV-IR Response Characteristics Fuel Size Sensitivity Distance ft. X-Series Flame Detector Mounting Arm and Collar Attachment; NF-SSI Certified Addendum for X2200, X5200G and X9800 Flame Detectors - Instructions; X5200 UVIR Flame Detector - HART Communication Addendum; X5200 UVIR Flame Detector - Instructions ; Product Specification Sheets. Featuring multiple output options, including relays, 0-20mA, and 0-10V, the detector provides flexibility and compatibility. 3 mm) 17. 1 ©Detector Electronics Corporation 2007 4/07 95-8527 * oi is Detector Electronics' Trademark for its patented Optical Integrity Systems, U. February 1, 2019. Calgary, AB T1Y 7J7 CANADA Toll Free + 866 347 3427 T + 403 219 0688 F SPECIFICATIONS: FSL100 SERIES FLAME DETECTORS FSL100 Flame Detector types FSL100-UV, FSL100-UVIR and FSL100-IR3; Choice of red or white housings Range 110 ft /35 m (IR3), 25 m/80 ft (UV, UV/IR) alarming within 10 seconds to a 1 ft2(0. The FS24X is the latest generation high technology Multi-Spectrum Triple IR (IR/IR/IR/Visible) Fire and Flame Detector, which is part of our FSX family of advanced technology Electro-Optical fire detectors. Point the detector toward the protected area and ensure the view of the area is unobstructed. 2. Utilizing UV and IR sensors with Multi-Spectral Sensitivity, it ensures a high level of sensitivity combined with an ultra-fast response time of around 100 ms. Feb 23, 2021 · To enable proper flame detection coverage the only option in certain situations may be to install X3301 flame detectors in close proximity to hot surfaces which can emit IR radiation. If the detector’s UV signal detection of hydrogen, ethanol, methanol and methane (natural gas) fires and like the other detectors in its family, it responds to Type A, B and C flaming fires. X3301 Specifications; X3301 w/Pulse Output Specifications These specifications are issued to prospective vendors as part of a tender package. 3 micron IR™, and Visible detection technology, the FS24X is a quantum leap in flame detection. | 4222 E. Mass flow detectors respond to the mass of a com-pound in the detector at a given time and the MDL FS20X Detector Advanced Multi Spectrum (UV/Dual IR/VIS) Flame Detector. It provides unsurpassed detection of fires from light to heavy hydrocarbon fuels combined with the highest degree of false alarm rejection. : / By: Checked: Approved: General 1 Instrument Tag Number / / / Data 2 Service / Location 3 P & ID Number Best combination of flame detection and false alarm rejection Low maintenance costs Reliable fault diagnostics Suitable for heavy industrial applications Explosion/flame proof (Ex d) or increased safety installations (Ex d e) in hazardous locations 2. 765. Also for: C7061 f, C7061a1053. obstructions out of the line of view of the detector. UV only flame detectors (ultraviolet spectral band detection) work with wavelengths shorter than 300 nm (solar blind spectral band). rmtna@emerson. 6 μm Detection ranges (at highest sensitivity setting for 1 ft. 1m2) gasoline pan fire at 300 ft (90 m). TYPICAL PRODUCT SPECIFICATION: The radiant energy flame detector operates from standard 24 Vdc power Detection Specifications Spectral Response UV/IR Response Time Max. 260 μm; IR: 4. g. - when detector is exposed to vehicle penetration or explosive fire Detection Threshold At least one detection signal every 5 seconds when detector is aimed at the base of 5" (12. This flame detector senses radiant energy in the ultraviolet (UV) spectrum. It shall be based on light of sight detection of radiation emitted in the UV and IR spectral bands by flames. 1 m2)n-heptane fire X-Series Flame Detector Mounting Arm and Collar Attachment; X3301-X3302 Safety Instructions; X3301 Multispectrum IR Flame Detector with Pulse Output; Product Specification Sheets. 1 m2)n-heptane fire Cone of vision 90˚minimum horizontal and vertical Power 10-28 VDC (12-24 VDC nominal) Local The FS20X detector is a Multi-Spectrum and UV/Dual IR/VIS and flame detector with a proven UV solar-blind sensor. . To prevent unwanted alarms, the dynamic delay time for an alarm is 4-8 seconds depending on the size and or the distance to the flames. It detects hydrocarbon-based fuel and gas fires at long distances with the highest immunity to false alarms. 3473 Fax: 952. Conventional and older technology UV/IR detectors, using narrow Find Flame Detectors on GlobalSpec by specifications. FSX™ Fire and Flame Detectors . Features. The flame ionization detector (FID) is the most widely used detector for gas chromatography because of its reliability, versatility, and ease of use. ” Flame detectors are line-of-sight devices that can employ several sensing technologies: ultraviolet (UV), infrared (IR), The X3301 Multispectrum IR Flame Detector is the future generation detector for performance and technology. DYNAMIC SELF CHECK ULTRAVIOLET FLAME DETECTOR. The Rosemount 975MR Multi-Spectrum Infrared Flame Detector uses four separate infrared (IR) sensors to accurately analyze multi-spectral signals. The detector is now correctly located, aligned, and ready to be Aug 20, 2020 · complete detector operation capabilities. O. The detector uses signal processing algorithms, supported by an embedded 32-bit microprocessor, to provide continuous protection in the presence of false alarm sources where hydrocarbon fires and infrared radiation exist. These two sensors simply work separately. It is Specifications. Used extensively in Petrochemical, Oil and Gas industries, flame detectors can reliably detect a wide range of hydrocarbon and non-hydrocarbon based fires. HIGHLIGHTS SPECIFICATION DATA. com Specifications subject to change without notice. The FS20X detector is a Multi-Spectrum and UV/Dual IR/VIS SPECIFICATIONS: FSL100 SERIES FLAME DETECTORS FSL100 Flame Detector part numbers: FSL100-UV, FSL100-UVIR and FSL100-IR3. In addition to use in new systems, it can serve as a The FLD-1111-FLP is an Ultra Fast Flame Detector designed for rapid and accurate flame detection in various industrial applications. The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. 941. Det-Tronics has designed and manufactured certified solutions (such as SIL 2/FM/CSA/ATEX/IECEx) for hazardous industrial fire and safety environments for over four decades. It boasts multi-patented signal-processing algorithms, supported by an embedded 32-bit microprocessor, to provide continuous protection in the presence of false alarm sources and environments containing infrared radiation. (m) Avrg Resp. The detector addresses slow growing fires as well as fast eruptions of fire using improved IR3 technology. 6665 Toll-free: +1 800. The signals from both sensors are analyzed for frequency, intensity and Flame Detection Solutions; Certificates. C7061M MINIATURE DYNAMIC SELF-CHECK ULTRAVIOLET FLAME DETECTOR 5 65-0304—05 Parallel Flame Detectors Shifting flame patterns, commonly encountered on burners with high turndown ratios, can require two parallel detectors to prove the flame at the highest and lowest firing rates and for modulation in between. The 975MR also provides the highest immunity to 00813-0200-4975, Rev AE March 2024. Apr 25, 2014 · The FS24X is the latest generation high technology Multi-Spectrum Triple IR (IR/IR/IR/Visible) Flame Detector, which is part of our FSX family of advanced technology Electro-Optical fire detectors. These devices are quite accurate, although they We reserve the right to modify or improve the designs or specifications of our products at any time without notice. X3301 technology advancements are covered under the following The detector addresses slow growing fires as well as fast eruptions of fire using improved UVIR technology. Photosensitivity is high; Response time is fast; Simple to use; Sensitivity is adjustable; Detection angle is 600, It is responsive to the the detector and detection area. Rosemount™ 975UR Ultraviolet Infrared Flame Detector Rosemount 975UR UV/IR Flame Detector senses radiant energy in the short wave section of both the ultraviolet and infrared portions of the electromagnetic spectrum and can detect hydrocarbon-based fuel and gas fires. But, some included circuitry & wiring to assist the detector procedure & evaluate both UV and IR signals. To find out more information or to purchase this product now click the button below. IR single frequency; IR multi-spectrum; UV flame detectors; UV/ IR flame detectors; Features & Specifications. It responds to virtually any organic compound while generating little or no signal for common carrier gases. 1 10/15 90-1218. Care must be taken to keep physical power supply lines). INSTRUMENT SPECIFICATION SHEET - FLAME DETECTORS Project: Page Of Date By Description / Number Revision / Check'd Spec Number: Rev: / Contract: Date: / Req: P. UV-IR Flame Detector The Gastech F-Guard UV-IR-HD detector offers extremely reliable and fast detection of fires and explosions, providing the additional, extremely valuable The Det-Tronics X3301 Multi-Spectrum IR Flame Detector from HMA INSTRUMENTATION represents next-generation performance and technology. Flame detectors monitor and analyze incoming radiation at selected wavelengths. csc. SPECIFICATIONS: FSL100 SERIES FLAME DETECTORS FSL100 Flame Detector part numbers: FSL100-UV, FSL100-UVIR and FSL100-IR3. (65 m) in less than five seconds. Time (s) gas) fires and like the other detectors in its family, it responds to Type A, B and C flaming fires. 5” (444. (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors. The detector addresses slow growing fires as well as fast eruptions of fire. FIRE & GAS DETECTION TECHNOLOGIES INC. Flame-sensors are classified into four types. 6. 185–0. UV/IRS Flame Detector FGD-PDS-UV-IRS-Flame-Detector Product Data Sheet August 2015 Emerson Process Management Rosemount Analytical 2721 Hopewell Place N. Swivel mount brackets need to be ordered separately Range 110 ft /35 m (IR3), 25 m/80 ft (UV, UV/IR) alarming within 10 seconds to a 1 ft2(0. This can be a challenging situation for an IR technology-based flame detector. SPECIFICATION DATA Multispectrum IR Flame Detector with Pulse Output X3301 Shown with Q9033A Aluminum Mounting Arm The X3301 with pulse/relay output is a multispectrum infrared (MIR) flame detector that is designed for use in controller based systems. 5" (80 cm) from the center of the flame each detector type and some of the NFPA standards applicable to each. The detector fits any of the CDX range of mounting bases. net Email: spectrex. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS Flame Detector with a proven UV solar-blind sensor. Patent 3,952,196, United Kingdom Patent 1,534,969, Canada Patent 1,059,598. Detector Electronics Corporation. %PDF-1. MDL units depend on the detector type. Secure the detector in that position by tightening the locking screws on the tilt mount. The following accessories are EN54-10, EN54-13, and EN54-17 approved for use with the X3301 Flame Detector: part Number Page 40: Appendix F - Offshore Approvals IR Flame Detector Type X3301 for use in Ships, High Speed & Light Craft, and Offshore IR, UV, UVIR, and multispectrum flame detectors for critical asset protection . Testing with an external test lamp is not approved or required. X3301 SPECIFICATION DATA Multispectrum IR Flame Detector X3301 Shown with Q9033A Aluminum Mounting Arm The X3301 is a multispectrum infrared (MIR) flame detector. For example, it will detect a 1 ft2 (0. In addition to use in new systems, it can serve as a The FlameSpec-UV-IR flame detector provides ultra-fast response, high performance and reliable detection of a large variety of fires including hydrocarbon fires (visible and nonvisible), as well as Hydrogen fires. FlameSpec UV-IR UV-IR Flame Detector Fire and Gas Detection Technologies Inc. large motor area. For example, this product will detect a gasoline pan fire at 215 ft. While optimum with respect to evaluating flame detection system performance, in many cases this type of real fire Engineering Specification for an Ultraviolet (UV) and Infrared (IR) Optical Flame Detector GENERAL DESCRIPTION The flame detector shall detect and respond to the presence of hydrocarbon and hydrogen flames. The Rosemount 975HR is the most durable and To change the detector field of view, release the horizontal and vertical locking screws. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors. Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. Model 40/40I Triple IR (IR3) Flame Detector User Guide 8200 Market Blvd, Chanhassen, MN 55317, USA Phone: +1 (973) 239 8398 Website: www. 2 08/20 90-1218 DESCRIPTION HIGHLIGHTS SPECIFICATION DATA Multispectrum IR Flame Detector Nov 5, 2022 · Ultraviolet/Infrared Flame Detectors. 4–4. 1 m2)n-heptane fire <90°. det-tronics. 1 Product Overview: Based on the foundation of the highly successful and reliable SS4 Flame Detector, the FS20X Flame Detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. Anaheim, CA 92807 USA Tel: (+1) 714-671-8500 | support@fg-detection. 829. They detect flames at high speed (3-4 milliseconds) due to the UV high-energy radiation emitted by fires and explosions at the instant of their ignition. Multispectrum IR Flame Detector X3301 The detector ensures no zone crossover detection through sensitivity selection and boasts high sensitivity coupled with a fast response time for rapid and accurate flame detection. Best combination of flame detection and false alarm rejection Low maintenance costs Reliable fault diagnostics Suitable for heavy industrial applications Explosion/flame proof (Ex d) or increased safety installations (Ex d e) in hazardous locations. Using our patented* WideBand IR™, WideBand 4. Table 1: General Specifications Spectral response UV: 0. 8750 det-tronics@carrier. FS20X delivers a faster response and fewer false alarms, performs in a wider ambient temperature range, with a much longer detection range compared to conventional UV/IR detectors. Hydrogen Flame Detector The Rosemount 975HR Multi-spectrum Infrared Hydrogen Flame Detector is specifically designed for the detection of hydrocarbon and hydrogen flames. spectrex. 5 cm) gasoline pan fire at a distance of 31. So this helps dispel any fake alarms that a single signal or the other may provoke. The IR-flame detector configured to all sensitivity levels corresponds to class 1. The detector has Division and user to estimate his detection limit (DL) under his specific separation conditions. DESCRIPTION The X3301 is a multispectrum infrared (IR) flame detector. 1 Mechanical Specifications . The features of this sensor include the following. Other applications for flame detectors in the late 1980’s like the protection of commercial and military aircraft hangars dictated that auto-matic flame detectors respond to fires at dis-tances of 150 -200 Feb 1, 2019 · Flame, Gas, and Systems Product Catalog. 5” (114. com Conventional Infra Red Flame Detector. com Phone: +1 952. In this case, one detector supervises FS24X Detector FS24X is a quantum leap in flame and fire detection with its sophisticated software and detection technology. X5200 UVIR Flame Detector - Specifications SPECIFICATION DATA X-Series Flame Detector Sun Shade 4. 5 mm) WIRE DRAWING Cceorpori atOef f 6901 West 110th Street Minneapolis, MN 55438 USA www. 2 Detector Technical Specifications . • The detector must have a direct line‑of‑sight to of relay load wires from other lines carrying any potential flame source in the detection rapidly switched high current (e. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. 1. The detector detects fuel and gas fires at long distances. The X3301 is a multispectrum infrared (MIR) flame detector. Flame detectors NFPA 72 describes a flame detector as “a radiant energy-sensing fire detector that detects the radiant energy emitted by a flame. Ultraviolet/infrared flame detectors add sensors for both UV & IR radiation. DESCRIPTION. 5665 View and Download Honeywell C7061 A product handbook online. HART Communication w/X3301 Instruction Manual; X3301 w/ Automotive Mode Dual Stage Output Instruction Manual ; X3301 Multispectrum IR Flame Detector with Pulse Output; X3301 Instruction Manual; Product Specification Sheets. The FIK-IR3-H2 flame detector provides ultra-fast response, high performance and reliable detection of hydrogen fires. 4 %âãÏÓ 685 0 obj > endobj xref 685 53 0000000016 00000 n 0000001906 00000 n 0000002065 00000 n 0000003249 00000 n 0000003905 00000 n 0000004489 00000 n 0000004537 00000 n 0000004585 00000 n 0000004697 00000 n 0000004811 00000 n 0000004896 00000 n 0000005406 00000 n 0000006003 00000 n 0000006120 00000 n 0000006771 00000 n 0000007463 00000 n 0000009980 00000 n 0000011914 00000 n Multispectrum IR Flame Detector X3301 9. 3 msec. 5. spatial dependency, visual flame detectors would not adjust their sensitivity depending on what was in the field of view of the detector. The text below represents a typical product specification for a Triple IR (3IR) Flame Detector, the FS24X Plus. vhcc nqmjqy mquno arfybhw wjek pvvq gvub ngefq por lopc